More on the detail trap from The Erratic and Wandering Journey….

Out of Context?

I recently re-blogged René Gourley’s post, in which he quoted Marty McGuirk’s comment on Georgia O’Keefe:

“Nothing is less real than realism. Details are confusing. It is only by selection, by elimination, by emphasis, that we get at the real meaning of things.”

This is a lot deeper than an initial reading might suggest: O’Keefe was talking about identifying the essence of something, so that it can be drawn out. She was not, necessarily, talking about eliminating every detail, but making the point that you can remove some of the distractions from what you are trying to portray, to make your creation clearer.

That said, I think a degree of caution is necessary when translating Georgia O’Keefe’s words to our hobby.

Our models are not static 2-d representations attempting to emulate the impact of distance on stereoscopic vision which makes judgements of size and distance based on relative angular displacement (“perspective”). We have depth as well as height and width. We actually have twice as many dimensions to play with, for we also have time, allowing movement, which in a painting may be portrayed by blurring some of the detail, and things which are far away and indistinct may come closer and resolve into exquisitely made tiny parts on a model.
Say, for example, that you are building a model of an industrial steam tank engine. There would be levers for opening the sand pipes, with flat rodding and various cranks running from the cab down one side to a sandbox, with a crank and rod running across the back of the smoke box to a sandbox on the other side. For the sake of illustrating the point, this is a scratch build.
How do you best represent this? In theory, you should have some rectangular strips of brass, pinned and soldered at each joint, using the head of the pin to represent a rivet or bolt. That would provide the ultimate in detail. Of course, if you were working on a 5” gauge live steam engine, it might well be assembled to work, but as you come down the scales, you get a point where the extra detail of doing it the “hard way” gets lost in shadows, so unless you are building for a competition, is it worth bothering at all? Possibly not, once you get down to Z gauge, maybe, but even in N Scale, a complete absence of the rodding may not look right. So, what you can do, is use a piece of wire to represent the rodding, cranks and joints: if you feel really adventurous, you might even squeeze parts of it flat, to improve the looks. This would work well on a “layout quality”/“3 foot rule” model in most scales, including 7mm scale, but especially so for scales smaller than this (I know, ‘cos this is what a friend has done). [b]But[/b] – and this is the crucial point – it still needs to be bent in the right places, and in the correct direction. You don’t simply take any old piece of wire and 30 seconds later say, et voila! No, you take care to select a piece of wire that is noticeable but not obvious, and measure and bend carefully. Say 5 minutes. Still easier and less time consuming than doing it all with separate pieces, and far better than leaving it out.

Another example. Geoff Forster, of Penhydd and Llangunllo fame, emailed me today about this and that, as you do, and went on to say:

“I was comparing two recent 16T mineral builds with an earlier example that I put together. The latter has etched ‘V’ hangers, brake lever, ratchet and safety links, whereas the new builds have just had the kit parts refined, and a wire brake cross shaft fitted. Can I tell the difference on the layout, can I heck, which begs the question is it worth going the extra mile in 4mm scale?”

Geoff went on to add that shape, colour and texture are more important than detail -which can be simply suggested by these three – in contributing to the wider scene, a sentiment with which I agree and which Geoff demonstrates oh so eloquently…

My take on the O’Keefe reference is not that you simply omit features, but you decide on how you are going to represent the features – in this respect, I am put in mind of what Allen McClelland unfortunately called “good enough”. I say “unfortunately” as the phrase is ambiguous and could be interpreted as settling for second best, when really it’s about asking what level of detail is required to suit your purposes. If you are operations-focused, then moulded on details will be more robust, yet will still catch the light. You also need more stock, and the fist- and time- saving features of freight cars with mould details are not only substantial but essential. If you are details-focused, where close-up viewing of your models is the order of the day, then moulded on details are definitely not if interest.

As René pointed out, “Marty is right: don’t sweat the details, unless that’s your thing, in which case, don’t expect anyone else to notice.”

But whatever your choice, you still make a neat and clean job of it: craftsmanship and workmanship are always necessary.