Tonbridge MRC show 2023 #1

Saturday morning and a visit to the Tonbridge show – by train.  I was going to do this in 2019, but there were engineering works and a replacement bus service, so I just didn’t bother.  Then came covid….  The trip by train is a pretty run across country on one of the longest sections of straight railway in the country – almost a Roman railway!

Waiting for Allan on Redhill station, this continuous rail train rushed though, topped and tailed by Class 66 locos.  Unfortunately I didn’t get a shot of the loco on the end, as it was one of the more unusual Class 66 liveries.

t1

The show was a good one, with some very good layouts, and a good variety of trade.  I think the best layouts there were ones that I had seen before, but there was a lot to look at.  And I managed to buy a few electrical odds and ends that I wanted (and a couple of coaches.)

Allan was helping Sean and Lucas run Leonard, that had been boxed up for about four years.  Still looks good….

It was good to see Outwell Village again.  One of my favourite layouts on the exhibition circuit – Wisbech and Upwell tramway in OO.

t5t6t7

I haven’t seen Tarring Neville for a while – probably since an Uckfield show.  I’ve always liked how this shunting layout can be viewed from three sides, and this probably influenced my Kuritu build.

Talking of odd shaped layouts, Railroad Crossing (HO) is a shunting puzzle, but with lots of very good scenic work, especially the buildings, around it.

t10

Good again to see was Copper Wort in OO.  A Burton-on-Trent brewery railway with lots of shunting, interesting industrial buildings, and of course barrels!  And it’s a circular (well, octagonal) layout.  What isn’t there to like?

Finally today, Habbaniya, Iraq, 1941 is a well exhibited diorama, with planes, trains, and military vehicles, all with forced perspective.  Always worth another look!

t14

More pictures from the show next time.

Posted in Exhibitions, Inspiration, Layout design, Out and about | Tagged , , | Leave a comment

ESNG meeting – 15 February 2023

I wasn’t at Wednesday’s meeting, as Maxine and I had slipped away for a couple of days to see friends in Chichester. We had a very relaxing time, and enjoyed seeing the sea at Wittering.  The weather was kind to us, too….

20230215_142702

No railway interest, apart from this lovely beach house (better than the monstrosities around it) built around an old railway carriage.  Perhaps from the old LBSCR, as this was their territory?

20230215_144412

However, Allan did provide a quick note and pictures from Wednesday’s meeting….

It was a quiet evening last night. 7 members and one visitor. Put up a 2 x 0 ciruit.

Today, Allan went to Tenterden and discovered that the plaque in memoriam of Miles had already been put in place.

I am sitting at the moment at Tenterden Town Station. Have just had a word with Pete about the plaque. He found out yesterday that it has already been put up.

And here it is at Northiam.  Good words for a good friend.

And three pictures from Northiam and Tenterden.

20230216_110956

Posted in ESNG, ESNG meetings | Tagged , , , | Leave a comment

ESNG meeting – 12 February 2023

A pleasant afternoon with seven members present.  We ran some trains, and socialised a lot.

An interesting layout – a 4×0 modular set up.  Dave was concerned that there wouldn’t be room for him in the middle of the layout, but he just about fitted when necessary!

Getting things set up….

20230212_144752

Plenty of trains running, on and occasionally off, the tracks….

A busy yard, with Allan’s new Swiss stock….

20230212_15242620230212_152503

Richard’s Swiss stock….

20230212_15054520230212_152355

American trains from Dave and Simon….

And British from Derek, Derek and myself…..

A GWR railcar in early BR livery.  I think this is my favourite livery for these iconic vehicles, and they look smarter then when in the original GWR chocolate and cream.

20230212_163831

The afternoon ended, as usual, with a curry.

Posted in ESNG, ESNG meetings | Tagged , , , | Leave a comment

Potpourri #1065

It’s been a busy week, so nothing too original today!

Yesterday morning was spent helping run our toddler group.  And I spotted a pre-school version of that world famous Rule 1 – Percy goes High Speed!

20230209_092623

Give him a few year and he’ll walk into ESNG.  And certain ESNG members have been circulating this typical example of club night running.  At least the new fiddle yard doesn’t do this as often!

derailed

Another nice picture of Bulleid’s 1-Co-Co-1 diesels – 10203 in early BR black livery.  Much as I like Peaks, these machines are even better to look at.  The chassis’ were very similar, I believe, so there is potential for a model here, if one can get a cheap Peak chassis.

diesel10203

Two Southern named trains.  First the Golden Arrow, with a Spam Can waiting in Stewarts Lane to move back to the train waiting in Victoria Station.  And a well kept L1 4-4-0 next to it.

goldenarrow

And the Devon Belle, headed by Merchant Navy class ‘Channel Packet.’  The early BR blue livery suited the unrebuilt Merchant Navy’s better than the various shades of green they appeared in.

channelpacket

Talking of L1’s, two more pictures of this Maunsell 4-4-0.  Built in 1926 for the south-eastern section these were a development of the earlier SECR D, D1, and L classes.  In some ways already dated, they performed very well and had a long and useful life, before being displaced by larger locos and electrification.

And their ancestors, the D1 and the L classes…

And finally for today, keeping the SECR theme, an R1 0-6-0T.  Elder readers may have had the Hornby-Dublo version of this little loco.  I never owned one, but did have a chassis with a Wills white metal kit of a LSWR G6 on top. 

r1z

Meanwhile, my modelling this week largely consists of designing a diode matrix.  I hope to be able to report soon on ESNG’s next building project….

crash2

And certainly on Sunday’s running afternoon….

crash

Posted in Inspiration, Out and about, Prototype | Tagged , , , | Leave a comment

A sort of Minories of my own – 23

Marking time a bit with this post.  I’ve spent the last couple of days completing the control panel.  All the switches, buttons, and the controllers themselves have been mounted on the panel, and the panel recessed in the baseboard.  As ever, it could be a little neater in places, but it looks like it will work.

20230206_171653

I think that I will next get the wiring onto the back of the panel, then it will be back to trackwork.

But later today, first wires added to the panel, and a Gaugemaster transformer wired to a plug glued to the transformer casing.

For those of you who worry about rail size (code) and profile, here’s a chart showing all the rail types in use on the GWR in 1908.  It covers most options!

gwrrails1908

And a fine shot of a Southern H15 leaving Salisbury Tunnel – scene of a recent rail crash and an interesting salvage operation to get one of the units out of the tunnel.  Notable, too, are the crimson liveried LSWR coaches at the head of the train, in front of some green coaches.

H15salisbury

Meanwhile, back at ESNG, we are considering whether to start a new project, after the relative success of the N-mod fiddle yard.  Possibilities include some more N-mod corner boards or an N-club fiddle yard/end loop.  Deliberations should be good for a few weeks…..

Posted in Jon's layout ramblings, Layout design | Tagged , , , | Leave a comment

Potpourri #1064

To start today’s mix, an interesting picture of London Victoria, around 1920 (photo Richard Meager.)  Some details here that would look good on a pre-grouping layout.

First off, why is there a loading gauge at the platform ends?  Possibly to check that the horse drawn carriages that were loaded onto carriage trucks, or even CCT’s (covered carriage trucks) were within gauge once the train was on the main line.

Which also answers the H&S question.  Why is there no barrier or fence at the end of the tracks?  Presumably, the wooden decking over the buffer stops allowed loading of said CCT’s.  Put this in your layout and wait for the critique at the next exhibition!

There’s the line of small boys, mostly in cloth caps.  And what appears to be an LBSCR H1 Atlantic at the head of the train, that consists of later Brighton bogie carriages.

victoria1920richardmeager

Some 35 years later, a U Class 2-6-0 simmers another Victoria platform end.  Any reader remember, or even travel on, British United Airways?

uvictoria

Another U class, on shed, and the very similar 2-cylinder N class.  Both photos taken at Guildford shed.

Last Southern picture for today.  A King Arthur emerges from Knockholt tunnel in Southern days.  This ‘Scotch Arthur’ was one of a batch built by the North British Locomotive Company in 1924.  It’s an early photo, too, as the engine hasn’t acquired smoke deflectors yet.

arthurknockholt

A couple of American photos.  First, Allentown, PA, in steam days, with the Lehigh Valley ‘John Wilkes’ named train at the platform.  A wonderful livery for both loco and carriages.  Also interesting in this photo is the extensive use of concrete on platform and river retaining wall.  There’s the river closely adjacent to the railway, and once again in pre-H&S days, just a flimsy railing to stop you falling in.  Very few lights on the platform that I can see, too….

AllentownPA

The steam locos would soon be replaced by the almost as attractive Alco PA diesels…

LVpa

A second photo of interest for modelling detail is this more modern photo taken in New Jersey during Conrail.  A switcher is undertaking some rapid moves at a passing place on a singled main line.  All complicated by the facing and trailing sidings serving the industries.  And some rapid work was needed, as there were other freights scheduled, plus an RDC passenger service passing through at 80 mph.  Modelling points are the run-down track in the industry, the variety of cars in the train, the dwarf telegraph poles, and the encroaching vegetation.

NewJersey

And to finish, an F-unit with a more leisurely bit of switching….

shorttrain

Posted in Inspiration, Out and about, Prototype | Tagged , , , | Leave a comment

ESNG meeting – 1 February 2023

Back again for the Wednesday meeting.  It was a slow start, so we waited to set the layout up, but members then started to arrive, so we ran trains.  In the end eight members came through the door (and left again later.) 

With the new fiddle yard, the 2×0 layout is easy to set up and scenic all the way around.  It will probably be the standard for Wednesday evenings.  Sunday afternoons, we have a bit longer to meet, and usually a little more energy to set up a larger circuit.

20230201_195450

Simon was bulk testing diesels again, and Neil and Martin ran their usual long trains….

More American diesels on test….

20230201_20163820230201_200401

An oil train with Revolution Class A and B tankers.  I managed to reduce the weight in the Class A’s, that makes a longish train possible.

20230201_20061120230201_200617

Martin’s tiny – and surprisingly noisy – O8 on its own and on a PW train.

20230201_20234020230201_202722

More power, more PW, from Neil

20230201_195541

And Chris’ slightly older PW train….

20230201_211315

Finally a German intruder!

20230201_195521

Yes, they ARE enjoying themselves…..

20230201_195606

Posted in ESNG, ESNG meetings | Tagged , , , | Leave a comment

A sort of Minories of my own – 22

Not too much progress on the layout.  I have had a large sort out of my boxes for storing wiring and switches and rationalised them both – and found a number of things that I had lost.  And the good weather this week has forced me out into the garden for a massive tidy up, and a start to pruning the trees.

You may recall that I had extended the layout by 200mm to ease the track plan.  It occurred to me that the black facia would be an ideal location for a control panel for the layout.

20230111_120535

I then made a second executive decision – I have reverted from DCC to DC control.  The layout is small enough not to need DCC, and the point control can work just as well under analogue control.  I also happen to have a twin DC controller picked up second hand at a show.

Further thought about the electrics suggested that the points could be operated with just the three DPDT switches, one on each platform.  Connected to a diode matrix, the switch can set the route for ‘up’ or for ‘down’ running.  Next, I remembered that the Cobalt point motors have two switches attached.  One will change the point frog polarity.  By using a common return for the two controllers, the second switch can select the ‘up’ or ‘down’ controller.  So the layout can be operated by the three DPDT switches, plus isolating push buttons at platform end, and a switch for the loco spur point.

I think it will work…..  It will be interesting to see what happens.  Here’s the control panel, and the controllers that will fit in the white square.  I’ve had it printed on photo quality paper, to be durable and to look good.

control

Note that the layout now has a name – Ludgate West.  Like Waterloo East, it will be the secondary platforms to a larger station.

Allan and Derek visited the Eastleigh show last weekend, and Allan passed on a few photos.  The large American layout below caught their eye.  It was a four sided layout, but not a continuous run – as you can see, the layout ended with loops on one side, leaving room for operators to enter the centre of the layout without any nasty bending and stretching.  Maybe an idea for the ageing ESNG members?

And Westcliff looks to be an excellent layout.

20230129_10511720230129_105214

Posted in Jon's layout ramblings, Layout design | Tagged , , , | Leave a comment

ESNG meeting – 29 January 2023

Not a good start to the afternoon when I received this photo from Allan & Derek, returning from the Eastleigh exhibition…..

image000000001

A car fire (seen in the distance) had held them up on the M3, but they rolled in to the meeting only 20 or so minutes late.  And in the end we had a busy afternoon, with 11 members in attendance (and a good curry to finish.)

A fair size circuit was quickly set up…

20230129_143402

And trains were soon speeding around the main line.  (Faster with some operators than others!)

Little & Large #1.  Phil brought along this lovely O gauge Heljan Class 33 diesel.  It came from his late brother, like Phil a train fan, but modelling in O.  He worked for the Crompton company during development of the electrics for the Class 33s (alias Cromptons.)  Although like Phil a steam fan, this loco was a must for him.  A wonderful model (makes you want to go into the senior scale) and a precious family memory.

20230129_150900

Little & Large #2.  No comment!

20230129_150928

Trains running included items from Lucas….

20230129_14514120230129_152945

Allan…..

20230129_150307

Simon (with sound)….

20230129_161927

And Brian…..

Doctor, I keep seeing blue elephants……

20230129_143420

And as ever, Brian took some good footage of the afternoon.

Posted in ESNG, ESNG meetings | Tagged , , , | Leave a comment

Erith MRS exhibition 2023

Saturday, and another morning in the company of Mr Dawes.  Collected early to have time for a breakfast – as a retired milkman, I’m convinced that Allan knows every cafe in the south-east…..  Even after a top-up of tea and coffee, we had a queue to get into the show, but we were able to have a good look around before it filled up.  I haven’t got pictures of everything, but here are a few items that I especially enjoyed…..

First the Minories department.  Hallam Town is classic Minories in 2mm finescale, but moved north into the Midlands.  If I recall correctly, the layout was built over a weekend at a show.

And St Saviour Street is a slightly developed Minories in N.   Again, simple but effective scenery.

20230128_100838

I enjoyed Seaton in P4, modelling the station in LSWR days, with a more complex track plan than when the Southern rationalised it.  And some excellent old goods wagons on show.

20230128_10334720230128_103420

I’ve seen Barryconnell Road before, but it’s another layout always worth a look.  It’s circular, and models Irish 5′ 3″ standard gauge (with the correct scale track gauge) in 3mm.  Great modelling!

20230128_104011

20230128_104026

Lots of lovely overhead in HOm on the RhB Santa Maria.

20230128_11011320230128_110122

I liked Sheepcroft in EM – a simple minimum space plan but well modelled throughout.

20230128_110632

Fawcett Street offers plenty of shunting in a small space, with a clever track plan…

20230128_105319

Lots of snow on Que’vy….

20230128_103255

Light railways in O and in Kent with Sarre.

20230128_105856

A Scottish River on Mertonford…

20230128_110435

And to finish, a rather ethereal picture of Ray and Anna, who as usual brought their living room and coffee table to the show.

20230128_100354

There were a number of layouts that seemed to have just moved on from Canterbury last week.  I haven’t repeated the pictures….

Erith is billed as one of the biggest shows in the south of England.  It lived up to that billing.  Masses of trade, though mainly selling second-hand OO stock.  And perhaps too many generic OO layouts for my rather fussy liking.  But a good morning out, and we ran into a good number of friends at the show – exhibitors, traders, or just good honest punters and ESNG members.

Posted in Exhibitions, Inspiration, Out and about | Tagged , , | Leave a comment