Repost – Layout design – different voices – micro-layouts

Another repost today.  All’s well in the Bartlett household, but modelling has been replaced by gardening for a day or two.  After Maxine’s epic pruning work, fortunately the shredder still worked.  And the results were spectacular!

Back to the post….


For a lot of layout planning fun, try http://carendt.com/ . Here you will find the late Carl Arendt’s site, “Micro layouts for model railroads – Creative concepts for getting the most bang out of the least space.”

There are nearly 500 micro layouts on this site. Some are not worth a second glance, really, but many are excellent and could be expanded (yes – expanded) to make a module. The “Micro-layout Scrapbook” contains some of the best ideas, as these are often slightly larger layouts.

What is a “micro layout”?  Micro layouts are defined as “small model railroads, usually less than three or four square feet in area that have a clear purpose and excellent operating capability.” The layout size is more a state of mind than a rigid dimension, although “four square feet or less” (“under 3600 square centimeters”) has become the canonical size for a micro, regardless of scale. What distinguishes these layouts from simple dioramas is the requirement for “excellent operating capability”. These are working railroads, not just display scenes or tail-chaser loops.

Why would anyone want to build a micro layout? They do have advantages, including:

• They’re small enough to complete in a reasonable period of time;
• They’re reasonable in cost;
• They’re small enough to permit detailing to the nth degree; and
• They need little space to run and store.

Planning an ultra-small micro layout is slightly different from traditional model railway design methods. It has a lot in common with theatrical stage set design, where you carefully pick a single location then figure out how to squeeze the illusion of it into an extremely small space. Like stage designers, you’ll find yourself using a lot of special tricks including backdrops, low-relief and flat models of structures, forced perspective, behind-the-scenes fiddle yards, and carefully chosen rolling stock.

Carl Arendt also produced three books of micro-layout idea. These can now be bought as PDF e-books from the site for a very reasonable price. Recommended!
Below are some micro-layouts – hi-jacked from the web site.

PRR

Based on a real location, and modelling traffic in and out of the steel mill in the foreground. The traverser is the key to moving wagons around.

amalg

Designed for passenger stock, the two overbridges convince you that 2 coaches are really 10. I fancy building this as an interurban line, so that one or two car trains are prototypical.

BOX STREET

boxst

Box Street is a modern classic. Reasonable shunting and operational options in a tiny space (this is 5½ feet in HO) and one point and a single/double slip. The sector plate completes the loop. A number of people have built this, and it works well.

tram

This would work well in a similar space in ‘N’.

Posted in Layout design | Tagged , , | Leave a comment

Repost – Java junction

Been a bit busy in the garden today – so here’s a repost from 2013, with the pictures enlarged.  I’d love to go back there, but perhaps not in 2020!!!!


Keeping the overseas flavour, here are four shots of Banjar, Java, and some Indonesian trains.  A modelling point I liked are the grassed areas between tracks.  You don’t see those at Clapham Junction!

And a bit of added pure tourism from that project.  The Acip made the best fried noodles that I had ever tasted – and they still haven’t been bettered!

And Pangandaran was the local ‘seaside’ for the occasional weekend escape.  Once served by a branchline from Banjar, and some of the viaducts are still in place.

And Borobudur, a 9th century Buddhist stupa in central Java.  I think that I’ve visited it three times, and it’s one of the most impressive sites that I’ve ever been to.

Posted in Out and about, Prototype | Tagged , , | Leave a comment

Covid-19 diary #6

Modelling has slowed over the last few days, as Maxine has recruited me into the garden.  I’m no good at constructive gardening, but demolition…..  We were amazed to find that our old shredder is still working, despite going a bit rusty in places in a leaking shed, so I’ve begun to work though Maxine’s comprehensive prunings!

But I have got a little work done, starting the build of two NGS Gresley full brake kits.  Nice models, and easy to put together (so far) despite a few fiddly bits…

I suspect that I won’t have to use the Ultima nickel-silver sides that are in my gloat box….

Next project – a pair of Thompson ‘Deal sided’ full brakes.  Should be easy to put together, as it has rectangular sides and ends with no tumblehome on the sides.


I suspect quite a few of us have got some modelling done recently.  Brian is no exception.

Isolation Made me Do This

Dear All,

A bit of fun amongst the endless doom and gloom

Stay safe!

Cheers,

Brian

Posted in ESNG, Jon's layout ramblings, On my workbench | Tagged , , | Leave a comment

Odd modelling ideas #3345

Just a potpourri of photos and things today!

Makes me cold just looking at it!  There’s a little bit of snow still on the ground at Sayre, on the Lehigh Valley.  Evocative photo, including some early container traffic….

Here’s one to model in ‘N’ – tractor shunting.  In fact it has been done, but the tractor has to push the (British) wagons, rather than tow them.  But shunting with a large British Railways horse – that would be a real challenge….

Dover Marine would make a good model.  (It has been done, but this view foreshortens a large yard into model size.)

Here’s a scenic cameo for you – repainting a zebra crossing.  Of course, if you are of a certain age you’ll recognise this as no ordinary crossing – Abbey Road’s markings have no doubt been worn down by thousands of tourists.


And finally, all this modelling time is all very well, but I wouldn’t mind a walk in the woods!  It would be bluebell time, somewhere out there….

Posted in Inspiration, Out and about, Prototype | Tagged , , | 1 Comment

Covid-19 diary #5

Well, Saturday should have been holding our annual model railway show, N Gauge SouthEast.  Inevitably cancelled.  But some people don’t give up that easily!  Good one Christopher Tank Parker and we’ll make you wear it next year.


Meanwhile, back in the loft, I made a decision as to my N-club modules.  I took a tenon saw to the 1200mm board, and it’s now just 900mm or so long.  Still heavy, but a lot easier to move around.  As I get older, it’s not so much the weight of the thing, but its bulk.

I refitted the N-club end plate, conveniently against an internal former.  All the original sidings are the same length, but the main line is a bit shorter.  And it fits better into the loft space.

I’ve also finished the creamery building.  A bit rough in places, but an enjoyable build.  And it’s not a shake the box job – it’s all my own work.

I now need to relay the track on the main line, that I trimmed back to enable me to cut the board.  I think my Xuron track cutters are still in the church in the ESNG toolbox?  I may have to rescue them on my next visit to check the building and mail box.


And to brighten up your day, obviously a prospective ESNG member on the right?

Posted in ESNG, Jon's layout ramblings, On my workbench | Tagged , , | Leave a comment

Odd modelling ideas #182

Normal for Norfolk?  Seen in a Sheringham butcher’s window.

It’s an old picture, so I don’t know whether it’s still there.  Still, nice to see that they also do smoked sausages!

This one’s easier for the average modeller! (Picture: Facebook)

Meanwhile, I’m with this guy….

Posted in Inspiration, Out and about, Prototype | Tagged , , | Leave a comment

Covid-19 diary #4

Still standing!  Thought I’d actually have to meet someone today, as the church fire extinguishers were due to be serviced.  But they cancelled and rebooked for next week, so near isolation with Maxine and the budgie continues.  (Oh, I forgot the tropical fish, but they don’t talk much….)

Upstairs in the loft, the creamery is progressing well.  The photos are, of course, cruel as they are approaching full size.  It looks a lot better to the naked eye.  Really just the roof and the corner trims to add.

And a hint of the next project – a small Tim Horn laser cut baseboard.  Watch this space….


And an interesting link, all about Moorgate station….

Hidden London – Moorgate

Posted in ESNG, Jon's layout ramblings, On my workbench | Tagged , , | Leave a comment

A picture to inspire….

Couldn’t resist culling this from Facebook (apologies if I shouldn’t), but it’s an inspiration for reworking a Dapol ‘Schools’.

A sight for sore eyes. June 6th, 1953, was Epsom Derby day which was patronised by the newly crowned Queen Elizabeth II. Stewarts Lane shed’s cleaners excelled themselves by turning out Maunsell ‘Schools’ class 4-4-0 no. 30915 Brighton just about as immaculately as a steam engine could be and here we see the result of their efforts at Tattenham Corner. The pre-war 4-Sub on the right is interesting as it is berthed in a non-electrified siding which is why there were always steam locomotives present for these events.

I liked the bit at the end about parking EMU’s on non-electrified sidings.  A possible operating scenario?

[Mike Morant collection]

Posted in Inspiration, Out and about, Prototype | Tagged , , | Leave a comment

Covid-19 diary #3

Kuritu back in action.  So on to the next job – to complete the two N-club modules that I had started, that contain a small USA switching layout.  I had wondered whether to scrap them and start them over (and I guess that I may still do that), but a little playing around with the track layout, and the buildings that will go on the layout, has nearly convinced me that it is better than I thought.

The modules are set up now, as below but not bolted together.   I need to break out the ballasting on the left hand module, as it didn’t go down properly.  I’m also wondering whether I can raise the boards a little higher, that will make access to the wires and plugs a whole lot easier.  But I am then in danger of running into the sloping loft roof – and have I got enough timber tucked away to do this?  All these decisions, but at least there’s plenty of thinking time available!!

I had already built this craftsman kit of an ice house.  It will probably be used as a general store shed, after the milk traffic closed down….

And the creamery, from the same manufacturer, is under way.  The sash windows consist of three separate pieces, plus glazing.  Although they are self-stick pieces, a little superglue has helped construction.  A really fiddly job, to be done one or two at a time.


One issue I have with the modules is the weight of the 1200mm board.  It weighs a ton, especially as it has a transformer fitted to its underside.  I had also wondered whether to trim 300-400mm off the length.  400 would be better, as it would leave a standard N-club board, but 300 would suit the track layout better.  More decisions!  Now if you want a really light railway, try this…..

A lightweight shunting plank

Posted in ESNG, Jon's layout ramblings, On my workbench | Tagged , , | Leave a comment

LVRR – Dorothy

This would make an interesting model!  No. 1, the private car of the Lehigh Valley Railroad’s superintendant.  Must have been a bit hot inside during the summer months!

But imagine the comments you’d get as this trundled past on a layout – looks like something out of Wacky Races….

And it makes Dougal Drummond’s ‘Bug’ positively elegant!!!!

Posted in Inspiration, Layout design | Tagged , , | Leave a comment